There are three files for OS/2 Warp.
  REXSCSI.SYS
  SCSI37.ADD
  SCSI37.DDP

[KXL-D740 Installation for OS/2 Warp V3]

Make sure that interface cable is connected to the Interface Card and
to the player.

1) Turn on the player and then insert the Interface Card to your 
   computer's PCNCIA type II card slot until is stops.

2) Turn on your computer. OS/2 Warp starts.

3) Doble click on icon [OS/2 System].

4) Doble click on icon [System Setup ].

5) Doble click on icon [Device Driver Install].

6) Insert the supplied Setup disk into drive A(or B), 
   and click [Install].

7) Select "KME KXL-D740 SCSI PC Card", and click [OK].

8) Click [Exit].

9) Edit the config.sys as follows.

     CONFIG.SYS
    +---------------------+
    |        .....        |
    |                     |
    | BASEDEV=REXSCSI.SYS | <== ADD
    | BASEDEV=SCSI37.ADD  |
    |        .....        |
    |                     |
    +---------------------+

10) Restart your computer.

[PROBLEM]
We found the follwing problem in this morment.

 If you turn on your PC with a CD-DA in the player, the PC start 
 very slow. Player is busy.
