New in SoupGate v1.03/-1999-02-04

* Added HeaderInfo option to chose whether name or e-mail address
  is put in header and/or inserted into message body
  (requested by Richard Menedetter)

* Added option to configure default character set (previously us-ascii
  was used when no corresponding CharSetMap could be found)
  (requested by Richard Menedetter)

* Fixed minor bug in QuoteTo feature, which mistook quotemasks at end
  of message for quotemasks at beginning of quote

New in SoupGate v1.03/-1999-01-03

* Several problems fixed in exporting of PKT files attached to
  messages, especially with the ArcMail style outbound
  (requested by Richard Menedetter)

* AddrMap translation problems fixed
  (reported by Andre Grueneberg, Kari Suomela, Pedro Cardoso, Sean Rima,
   and I'm probably forgetting some more people...)

* empty messages without files attached are no longer exported

* messages without a CHRS kludge now correctly default to us-ascii
  (reported by Peter Lacus)

* fixed problem that sometimes caused 8bit/quoted-printable when only
  7bit characters were used

* maxzone for FidoDomain now optional (as was described in doc)

* all commandline options can now be abbreviated
  (requested by Richard Menedetter)

New in SoupGate v1.03/-1998-12-27

* DOS executable is now bound with PMODE/W extender because
  of segment overflow; this also means SoupGate can't run on
  286 and below anymore

* Added support for charset<->CHRS translation
  (requested by Peter Lacus)

* Allows exporting of all packets (*.PKT) addressed to the
  gateway or a route node in a specified directory using the
  /PKT=<dir> commandline option; this is useful if you have a
  tosser that does not support uncompressed mail (see included
  COMPREXP.BAT)
  (requested by Peter Lacus)

* Fixed bug causing JunkStr keyword not working properly
  (reported by Patrick Elsaesser)

* Mailing lists now also filtered on Sender and X-From headers
  (requested by Egor Duda)

* Introduced FidoDomain keyword that allows using other
  domains than fidonet.org for auto-mapping of addresses
  and Message-IDs
  (requested by Andre Grueneberg)

* Fixed bug in fidonet.org message-IDs for points, where a
  dot was omitted between p# and f#
  (reported by Andre Grueneberg)

* Fixed problem with SEEN-BYs in mailing lists

* Fixed problem that could turn the MSGID sequential number
  into a negative value when converted to an ifmail-style
  decimal message-ID

* Added 'junk' option for JunkAction and OwnOrgAction, which
  extends 'move' to set the To: field to JunkMail (useful to
  get around the problem of some tossers forwarding personal
  mail from the junk mail area)

* Own organization messages will now contain JUNKMAIL kludge
  (and possibly JUNKMAIL-TO) as well, and their count will no
  longer be identified as "archives:" but as "own org:" (the
  former could be too easily confused with archives in the sense
  of compressed mail files).

* Fixed bug that sometimes caused whitespace to be included
  in the Newsgroups: line when crossposted messages were
  exported, causing problems while posting

* Made clear that parameters in configuration file must be
  separated by spaces, not ^I tabs
  (reported by Andre Grueneberg)

* Fixed erroneous URL listed in doc file

New in SoupGate v1.02/-1998-11-04

* Junk mail detection can now be categorized for email and/or
  news
  
* JunkStr strings can now also be checked in news subject
  (not in message body)

* Extended AddrMap keyword features:
  - can now select From emailaddress depending on From name
  - takes over Personal functionality

* Personal keyword now obsolete because of AddrMap extensions

* Fixed bug in automatic From-address translation while exporting
  (reported by Kari Suomela)

* Fixed bugs in PATH and SEEN-BY lines introduced in v1.01
  (reported by Sean Rima)

* Now removes Pvt flag for mailing lists
  (reported by Sean Rima)

* Fixed bugs in To/From name processing while importing

* Updated message-ID translation info in DOC as well
  as incorrect version number on top (oops)

New in SoupGate v1.01/B-1998-09-12

* Bugfix version for SoupGate v1.01/release

* Fixed bug in MIME encoding routines with an extra padding
  byte; most decoders didn't notice but e.g. Pine would give
  an "internal base64 decoder error"

* Now always adds INTL line instead of only for inter-zone
  netmail, as some tossers (e.g. FastEcho) would show the
  originating zone as 0 during the tossing process

New in SoupGate v1.01/R-1998-09-01

* First non-gamma release; SoupGate seems to have proved that
  it has reached a certain stability by now

* Direct mail (DUT/DLO) will now be exported as well; also added
  ExportAllMail option to export mail on hold as well
  (requested by Pedro Cardoso)

* Added DecodeDir ... ALL option to decode files attached to emails
  in that directory as well instead of in the inbound directory
  WARNING: this may cause problems with your tosser, use with care!
  (requested by Pedro Cardoso)

* Added TransFidoOrg keyword to auto-translate fidonet.org addresses
  to the corresponding fidonet addresses when importing

* Improved QuoteTo routines which would sometimes fill in
  incorrect To-names for newsgroups

* When no Origin is specified and Organization line is empty or
  not present, the From-address will now be used.

* Files decoded from IgnoreMessageText-messages will now also display
  information and correctly update the file counter

New in SoupGate v1.01/-1998-08-29

* Fixed some bugs in the PKT encoding that would cause serious
  problems on some tossers (e.g. Squish)
  (reported by Pedro Cardoso)

* Added UseQP option that allows to disable quoted-printable
  encoding for 8-bit characters
  (requested by Serge Wizgounoff & Max Alekseyev)

* Added optional From: line that can be inserted in messages
  that are sent to the gateway for exporting, which allows
  users to receive replies to their own email-address.
  (requested by Kari Suomela)

* QuoteTo feature to determine To: name in newsgroups from
  quote template re-supported. QuoteChar and QuoteMask keywords
  added to allow configuration of the QuoteTo feature.

* Added SUBJ=<subj> option to the Route keyword, which allows
  to set the subject for mail transports (for compability
  with programs like e.g. IREX).

* Multiple To/CC-addresses now supported also for importing;
  all these addresses will be used for mail filtering

* Will now use Reply-To field for REPLYADDR if present; this
  address will also be used for mail filtering

* Added IgnoreMessageText keyword to allow routing-messages to
  be ignored while the files attached to them are decoded

* Added JunkGroup keyword that allows to filter out junk mail
  based on the newsgroups a message is (cross-)posted in

* The sample junk mail configuration files (JUNK*.CFG) are now
  included -- use at your own discretion.

* Personal mail is no longer forwarded from mailing lists

* In the import status report, added information about the number
  of personal messages, decoded files and ignored-text messages

* Added /VERBOSE command line option to display from/to information
  for every imported e-mail and every exported e-mail/news message

* TEMP environment variable can be overridden with new keyword TempDir

* Fixed bug that incorrectly reported junkmail filtered out by the
  JunkFromTo keyword as JUNKMAIL: FROM.

* Fixed minor bugs in e-mail address parsing and mailinglist substring
  matching code

* Fixed hidden memory allocation bug

* Added contact addresses to beginning of doc file

* Included PKTVIEW utility to verify PKT files

New in SoupGate v1.00/-1998-04-03.

* First public gamma version release

New in SoupGate v1.00/-1998-03-28.

* Fixed bug that caused the start of some message bodies to be
  incorrectly interpreted as header information

New in SoupGate v1.00/-1998-03-14.

* Fixed serious bug in MIME decoding: some files (e.g. those
  encoded using Microsoft Outlook Express) would be truncated
  to 0 bytes

* Bug in new MailingList parameter fixed

* SoupGate now allows to split large PKTs, as some tossers
  would choke on them (not mine, obviously)

* SoupGate now allows to address replies to certain messages in
  newsgroups to a predefined name, which may then in turn be
  forwarded to a special personal mail area by another program,
  e.g. a mail tosser. For that purpose the Redirect keyword
  has been replaced with the Personal keyword.

* Bug in Internet->Fido MSGID/REPLY conversion fixed

* SoupGate now removes the "end" line after it has decoded
  a UUencoded file as well

New in SoupGate v1.00/-1998-03-07.

* Mailinglists that did not have an export email from-address defined
  would put all kinds of garbage in the from and reply-to addresses
  of the exported messages

New in SoupGate v1.00/-1998-01-18:

* Bink-outbound only: files inside flow files with no corresponding
  mail packet will now be sent as well - for Route-nodes only
  (allows for routing compressed mail to nodes)

* Messages containing no non-ASCII characters will be
  encoded using 7bit encoding instead of quoted-printable

* Bink-outbound only: PKT files inside flow-files where not
  deleted after they were sent, even in non-test mode
  [so if you've used these, e.g. a binkley + fastecho
  combination like over here, you may have to clean
  out "some" PKT files from your outbound directory]

* Messages for mailinglists won't be checked for junkmail anymore

* When Kill was set for JunkAction or OwnOrgAction, the rest of
  the message file was ignored as well

* Domain keyword removed; Message-ID uses fidonet.org domain
  and should now be sort of ifmail-compatible

* QuoteTo template recognizing removed; it caused much more
  trouble than it was worth (it might be re-implemented from
  scratch later, when all the rest works like it should)

* XPost feature fixed; Souper did not like the Newsgroups: header
  to be spread across several lines

* No longer assumes anything containing Newsgroups: is news

* Last reference in list is now used for ReplyID instead of first;
  this allows for much better reply-linking

* MIME encoding now uses 76 characters per line instead of 72

* You can now define an optional from-address for mailinglists
  (requested by Sean Rima)

* Some more statistics about the imported messages added
  (# of email, news, mailinglists and junk mail messages)
