Monitor for APC Back-UPS (USB) v 0.17
31.08.2015 (c) Larin Yury (aka Improver)

Mail to: improver@rambler.ru
Web:     http://apcusbm.narod.ru

The program is intended for tracking a condition of a uninterruptable power
supply (UPS) of APC series Back-UPS CS/ES/RS and Smart-UPS, connected by means
of applied to UPS USB-cable (part number 940-0127B or similar), and also for
turn off of the computer in case of power supplies disconnecting.

The program extends "as is" and for all troubles which the given program on
your computer I of personally any responsibility can make I do not carry, etc.


=== System requirements ===

- operating system OS/2 Warp 3.0 and above, eComStation
- installed driver for USB
- installed USBCALLS.DLL and driver USBRESMG.SYS: 
  from Lars Erdmann 10.199 (2015/07/23) or later, http://hobbes.nmsu.edu/h-search.php?sh=1&button=Search&key=usbdrv
  or from W.M.Brul 14.198 (2015/06/30) or later, http://hobbes.nmsu.edu/h-search.php?sh=1&button=Search&key=usbres0

Optional:
- for the control of OS/2, the 'Power' object requires an ACPI/APM driver
- for switching-off of a feed of the system block power unit ATX and
  established (efficient) in OS/2 a control system of power supplies is
  necessary.:-)

=======